Post 52
My final post on this blog, for this project.
I had food poisoning so I had to go through alot of complications during my presentation.
Like the screen decided to not want to extend properly.
Feedback:
- Focus on branding, make it big. Jazmi said.
- Think of a way to make it cost efficient
Tuesday, February 10, 2015
Thursday, February 5, 2015
Graphs of my emotional state and progress
Post 51
Happiness level: -20
I don't have enough time, should have asked for the extra one week I lost from being hospitalized. And tomorrow is the submission.
I can't get my wifi to work. It's hard.
I can't connect my pages together.
Jam's tutorial wasn't what I was looking for. *cries
Today I spent my day at the IIS setting up for tomorrow, and taking a simple walk through video. At least I progressed somewhat.
Happiness level: -20
I don't have enough time, should have asked for the extra one week I lost from being hospitalized. And tomorrow is the submission.
I can't get my wifi to work. It's hard.
I can't connect my pages together.
Jam's tutorial wasn't what I was looking for. *cries
Today I spent my day at the IIS setting up for tomorrow, and taking a simple walk through video. At least I progressed somewhat.
August 2014's progress was really high because it was still in pre-planning mode. I was ambitious and filled with energy.
October 2014 was a holiday, hence the very little progress and high emotional state.
And in November 2014, my progress shot up but I was very very emotionally down because that was when I encountered all the real problems.
Toward the end my emotional state was really low and had little progress. Due to my fever and etc.
Tuesday, February 3, 2015
Got the easy part done - WIFI ARDUINO XBEE LILYPAD
Post 50
Happiness Level: 6
I have to admit, I have been avoiding this project for quite sometime ever since my Dengue fever.
But I did double check the connection with the wifi and it works fine.
To make life easier, and to clear up what the tutorial failed to mention, (which resulted me and Yee Siang into panic mode) is that the +++ command is automatic, but the other commands are not.
Which means after typing ATMY or any other command, you have to press enter.
If not you would be like me, waiting for the automatic OK response for like forever.
I used two computers to send the messages, my desktop and my laptop and configured the 2 xbees by myself, with the help of the tutorial.
This is the CoolTerm on my desktop which acts as the SENDER,
Now to link it with Processing.
Happiness Level: 6
I have to admit, I have been avoiding this project for quite sometime ever since my Dengue fever.
But I did double check the connection with the wifi and it works fine.
To make life easier, and to clear up what the tutorial failed to mention, (which resulted me and Yee Siang into panic mode) is that the +++ command is automatic, but the other commands are not.
Which means after typing ATMY or any other command, you have to press enter.
If not you would be like me, waiting for the automatic OK response for like forever.
I used two computers to send the messages, my desktop and my laptop and configured the 2 xbees by myself, with the help of the tutorial.
This is the CoolTerm on my desktop which acts as the SENDER,
And the xbee,
And this is the CoolTerm (receiver) on my laptop.
And the Xbee.
One thing I noticed though, I cannot send messages from the receiver to the sender. Only the Glove Xbee could send the info, because I set it that way, There's not back and forth communication.
I don't think that would be a worry though, my project does not require back and forth comm.
Now to link it with Processing.
I'm not excited.
More things to do:
- Wait for Jam Long to reply me on the tutorial he had which could fix my unlinkable pages
- Set the invoke for the delay thing to restart. (probably only I would understand what I'm typing)
An update on the logistics too,
Looks like I won't be needing an arch or stage mount thing, the ceiling at Publika blackbox would suffice.
Sad that nobody wants to be near my installation because of its loudness.
As for the unity and the delay matter,
David told me that there is no such thing as 'YEILD' for unity C# and that I should only use INVOKE.
An update on the logistics too,
Looks like I won't be needing an arch or stage mount thing, the ceiling at Publika blackbox would suffice.
Sad that nobody wants to be near my installation because of its loudness.
As for the unity and the delay matter,
David told me that there is no such thing as 'YEILD' for unity C# and that I should only use INVOKE.
Subscribe to:
Posts (Atom)