Showing posts with label execution. Show all posts
Showing posts with label execution. Show all posts

Wednesday, January 14, 2015

Alpha Test with Level 4

Post 49

Happiness level : 8

Would give it a 10 if I had more help moving my junk up two flights of stairs.

Lecturers that gave their comments as well: Daniel Chong, Jiawern Kok, Jazmi Jamal, Sweii, Kelvin, Jam Long



You can see the band changing from green to blue!

So, based on my very unique survey, I have collected a number of drawings of faces which are pretty much explanatory.


Following things to improve:
- Make the differences wider between idle mode and active mode
- the tutorial isn't obvious enough
- get the wifi working

Edit//
My components from Singapore has finally arrived! Yeay!

Monday, January 12, 2015

Preparing for Alpha test with LV 4 Students (our juniors)

Post 48

Happiness level: 5

I've built a ramp for the projector with hard card but it came out the wrong height. I'll fix it tomorrow morning.

There are some progress, although very little. Many of my tutors and classmates were complaining that my band was impossible to wear because it was too tight. (Which I agree) So I sewed elastic bands to increase the elasticity of the band and stuck on the Velcro so that the white plastic flap could close properly and stop flapping around.


And here's me playing with the accelerometer. I realized I haven't really showed anyone this.



My wifi parts from Singapore haven't arrived yet and I'm starting to get worried.

As for the video during the experience, I had videos of people fist pumping but they were in black and white. Initially I wanted to make them all black and white because one of the videos in there are in black and white. But Jazmi said it looked like a revolt video.

SO, I re-edited it again and put the color back and added some film burns. I also increased the size of the tutorial man cause it was too small before.

It wasn't necessary to have a survey during the Alpha test, (we just needed 5 participants to try it out and gather their feedback in our little notebook) but I created one anyway.

I made it fun too, so that they would be more relaxed and honest when answering my questions. I didn't want it to be serious and boring, because that's how I usually feel when I'm asked to do surveys without a free gift as a reward.

Click to enlarge.



Here are some of the field work I did in stalking for scaffolding.



As for the 'scaffolding', I talked to a few people, but a flower shop (FLEUR) is willing to rent me a wedding arch with branches which looks great and mysterious for RM260. I think it's still too expensive so I might want to entice her with promotional opportunities so I could get it sponsored.

Saturday, January 3, 2015

Found a good tutorial for wifi xbee lilypad connection

Post 45

Happiness level: 5

Honestly, these past two weeks I was totally burn out from the previous ('final' visit from the industry expert) and had to recuperate. I did not progress as much but found out that:

a. The lag in the IIS is not caused by my coding, but by how un-powerful the machine I'm using is. I might have to carry my desktop there. Great.

b. Still have to merge two scripts into one because the serial can't read the ports if I just switch pages like that.

c. Have to solve the latency and clearness of the videos played during the experience.

d. There's a bug where there is no delay time when the person is inactive. It glitches and the idle video comes on and off.

e. The wifi module, I could do it with this tutorial. I need another dongle to test tho. And I do not want to spend another SGD39 on something which I would use just for a day.

f. I might just end up with one glove because I'm already over budget. Unless an unknowing angel is willing to sponsor the other one, which would obviously increase the epicness level of the project.

g. I'm starting to design the glove and improve its appearance. I cut half a bottle and am going to  tape over a strip of tape where the led would show brightest and use it as a stencil while I spray the rest of the bottle black. That way the light would be distributed and it would appear to be a long line instead of just a little round bulb.

h. I have to decorate the space. With alot of white mounting boards.



References

D I Y : AUDIENCE JACKET. (2015). 1st ed. [PDF] Toronto: OCAD University, pp.1-36. Available at: http://research.ocadu.ca/sites/research.ocadu.ca/files/socialbody/201106_AudienceJacket.pdf [Accessed 3 Jan. 2015].

Wednesday, December 17, 2014

Stuart Godwin visit

Post 44

Happiness level: 7

Can say I'm kinda happy with the progress I had in just two weeks of nonstop hardcore progress.

That's me and my band. I played a video first of the whole experience while interacting with my functional band. Only that the wifi is not on it yet.


My ball.


Looking at people enjoying my work is the best feeling EVER! #paysoffintheend



He was pretty speechless, saying my work is beyond his expectations and all that, but I think he was just being really really nice. Appreciate that.


He did stress on the importance of social media sharing which very few of our classmates did. Including myself.


Obviously with 23 years of experience in the industry, I HAD to ask him which interactive installation impacted him the most. You had to see ALOT of art installations in that time frame.

He said that what he found most amazing was like a 20ft 50ft screen (something like that, but it was big) and users get to experience a digital environment.

Size definitely does matter. If only I could get excess to a 20ft sphere ball. HMMM. (Jazmi did mention to make it huge if I could, but I don't have the cash to do it.)



The 2 week 'holiday' begins.

MERRY CHRISTMAS!!!!!!!!!

Thursday, December 11, 2014

Sewing til the AM

Post 42

Happiness level : 6

My Motion Graphics are 80% complete, they are taking a much long time than I thought. But I did try out sewing and it turn out looking like something that came out of a thrift store.

I have never sewed in my life, so this is literally my proudest moment, my proudest milestone.

After sewing of course, with buttons and everything, I discovered I cut the fabric straight down like a box. I forgot the human arm actually widens from the wrist up. So I didn't get to close it up properly.


This fabric is from a really old shirt, I used it because it's stretchy. 


I tried to cover it up but it looks really shady.


I discovered that sewing the boards on the fabric itself would be too flimsy. So I sketched out more ideas.

The red was inspired by Baymax from Big Hero 6. I wanted the interior to be two toned as well.


Then I realised, Buzzlightyear's suit has the same mechanism I need!
The compartment which conceals the boards. My dad suggested I cut up a bottle in half and use it as the flap. (like below)



Here are some more sketches for the band.


This is the sewing of the nylon hard fabric on the sports wristguards which are a perfect fit to wrist, and my father's. A cut up bottle will be used to encase the band.



I would be thickening up with two of these hard nylon fabrics and use the top flap as the base for my boards and sew them on the top flap. The bottom flap would prevent the conductive thread from touching the skin of the users.



Of course I went to dad and mom and they gave me two sports wristbands and sewed them together to get a better, firmer, stretchable band. Sewed a hard white fabric (used for collars of formal shirts) on the top of the cute bands to cover the little heart designs and prevent stretching from the top so that it wouldn't damage my boards.








Wednesday, December 10, 2014

Motion Graphics 100% by today HAVE TO.

Post 41

Happiness level: 4

I feel like Tadashi from Big Hero 6 with all these updates.

Here's a video of me talking for a change, I might sound dead but yeah all the deadlines are piling up this week so it's safe to say my spirits aren't at an all time high.


Saturday, December 6, 2014

Logistics and Microphone Debugging

Post 39

Happiness levels: 8

Tutor(s) present: Jazmi, Yee Siang, Jam!

Okay first up, the logistics.





Jazmi and I discovered that there was a leak at the wall from my graphics and suggested that I should vignette it out so the hard edges would be gone and there isn't gonna look like an error.

Other than that, the outcomes were pretty good, I suspended my polystyrene ball with a piece of fishing string and clasped the two halves together with the roll of fishing string in between to hold it up from within. Discovered that if I wanted to project on two sides of the ball I needed 3m+ of space.
That would be difficult since there are going to be about 30+ projects in the same area.

Should I compromise with just one side of the ball? :(

Discovered that the ball should be slightly higher than eye level so the users won't be able to see the shadowed top of the ball. Overall logistics looks pretty good and the user would be standing behind the projector to interact with it. 

Ill disguise the table and projector into my glove compartment holder & table (which I would also hide my computers and what not under it) and wrap it around with white board so it looks super clean and white and professional looking,

So happy everything works amazing.

Microphone Debugging

Jam came to the rescue!
My microphone got fixed and apparently I was uploading unnecessary scripts which hindered it to work. I also had to fix the baud rate so it matches the baud rate of my accelerator code. Everything is moving along swiftly. 
I just have to turn the strings to numbers with Parse and put them altogether, separate the game into three parts and upload the videos separately and I'm done with the coding! I'll have to focus on the wifi module next. (oh god)

And sewing. =(

Things to do next:
- Finish up the motion graphics for the two songs
- Code up the game
- Debug Wifi


Tuesday, November 18, 2014

First Ideation Tutorial of the Final Sem

Post 34

Happiness level: 7

Tutor(s) present: Jazmi Jamal

I was very happy with this tutorial.

Today for this session I brought my second set of music and it is wayyy better and more hyped than the first one.


I brought my boards as well to show Jazmi the placements for the boards and how it would effect the user experience. I showed him and it looked so long! Like this.


There was the LiPower and the battery to think about as well, and I wanted to sew it on the forearm, underneath my arm and the boards. Jazmi suggested that I shouldn't since the thread is going to be so thin and easily breakable.

He suggested that I stack the Xbee board and the arduino board so it looks like some kind of watch mechanism and it didn't need to fill the whole arm. A cuff would be a good design with velcro so that users could take it off and put it on easily.

He gave me a boxing glove as reference. Haha! He said to make sure to put these boards in proper casings to avoid malfunctions and interference from the environmental factors. 

I should also get on with the wooband design and the stage design as well, cause right now all I have is the really basic stuff, like how I want the band to be purple/skin colored/black and such.

Here are some references he shared with me that I could think of, to give my stage more depth and dimension.

They are all slanting walls with projectors projecting the images unto them.



Wednesday, October 22, 2014

Music editing

Post 30

Alright so after an entire month of holiday-ing I have decided to get back to work on the Woo Band. I edited the music and kind of pictured the entire flow with the sound effects and everything.


I created a mock up animation just to put on youtube. Obviously it will resemble nothing of this (as in the art style). It's kind of like a story board. At which point of the music when the graphics will be more aggressive and what not. So here's my little experiment with SUMMERTIME SADNESS:

I have edited 2 mixes so that people wouldn't be bored with just one music.
I have another one called ARE YOU READY.
Good progress I must say. 
HAPPINESS LEVEL: 8

Sunday, September 14, 2014

Misery & Linking Arduino to Unity

Post 28

I tried and tried again with my boards but it just couldn't connect.

I keep getting the same errors I got in my Aug 27 post.

Turns out I had to buy a SPECIAL FTDI Breakout board and the one I got from China is not compatible.

So, I have to get a new one. From Singapore.



I'm going to have to use my Adafruit flora to test this out while waiting for my usb chip, the tutorial to link unity and Arduino looks pretty simple.

My adafruit Flora works swimmingly and I got the response I needed. Step 1 complete.



I keep getting errors for the UNITY. Will look more into this soon. I can't seem to find the problem, I followed the tutorial word by word.





I'm going to start on editing the music tomorrow.


Happiness Level : 2