Showing posts with label Thoughts. Show all posts
Showing posts with label Thoughts. Show all posts

Thursday, February 5, 2015

Graphs of my emotional state and progress

Post 51

Happiness level: -20

I don't have enough time, should have asked for the extra one week I lost from being hospitalized. And tomorrow is the submission.

I can't get my wifi to work. It's hard.
I can't connect my pages together.
Jam's tutorial wasn't what I was looking for. *cries

Today I spent my day at the IIS setting up for tomorrow, and taking a simple walk through video. At least I progressed somewhat.


August 2014's progress was really high because it was still in pre-planning mode. I was ambitious and filled with energy.

October 2014 was a holiday, hence the very little progress and high emotional state.

And in November 2014, my progress shot up but I was very very emotionally down because that was when I encountered all the real problems.

Toward the end my emotional state was really low and had little progress. Due to my fever and etc.


Monday, January 12, 2015

Preparing for Alpha test with LV 4 Students (our juniors)

Post 48

Happiness level: 5

I've built a ramp for the projector with hard card but it came out the wrong height. I'll fix it tomorrow morning.

There are some progress, although very little. Many of my tutors and classmates were complaining that my band was impossible to wear because it was too tight. (Which I agree) So I sewed elastic bands to increase the elasticity of the band and stuck on the Velcro so that the white plastic flap could close properly and stop flapping around.


And here's me playing with the accelerometer. I realized I haven't really showed anyone this.



My wifi parts from Singapore haven't arrived yet and I'm starting to get worried.

As for the video during the experience, I had videos of people fist pumping but they were in black and white. Initially I wanted to make them all black and white because one of the videos in there are in black and white. But Jazmi said it looked like a revolt video.

SO, I re-edited it again and put the color back and added some film burns. I also increased the size of the tutorial man cause it was too small before.

It wasn't necessary to have a survey during the Alpha test, (we just needed 5 participants to try it out and gather their feedback in our little notebook) but I created one anyway.

I made it fun too, so that they would be more relaxed and honest when answering my questions. I didn't want it to be serious and boring, because that's how I usually feel when I'm asked to do surveys without a free gift as a reward.

Click to enlarge.



Here are some of the field work I did in stalking for scaffolding.



As for the 'scaffolding', I talked to a few people, but a flower shop (FLEUR) is willing to rent me a wedding arch with branches which looks great and mysterious for RM260. I think it's still too expensive so I might want to entice her with promotional opportunities so I could get it sponsored.

Saturday, January 3, 2015

Found a good tutorial for wifi xbee lilypad connection

Post 45

Happiness level: 5

Honestly, these past two weeks I was totally burn out from the previous ('final' visit from the industry expert) and had to recuperate. I did not progress as much but found out that:

a. The lag in the IIS is not caused by my coding, but by how un-powerful the machine I'm using is. I might have to carry my desktop there. Great.

b. Still have to merge two scripts into one because the serial can't read the ports if I just switch pages like that.

c. Have to solve the latency and clearness of the videos played during the experience.

d. There's a bug where there is no delay time when the person is inactive. It glitches and the idle video comes on and off.

e. The wifi module, I could do it with this tutorial. I need another dongle to test tho. And I do not want to spend another SGD39 on something which I would use just for a day.

f. I might just end up with one glove because I'm already over budget. Unless an unknowing angel is willing to sponsor the other one, which would obviously increase the epicness level of the project.

g. I'm starting to design the glove and improve its appearance. I cut half a bottle and am going to  tape over a strip of tape where the led would show brightest and use it as a stencil while I spray the rest of the bottle black. That way the light would be distributed and it would appear to be a long line instead of just a little round bulb.

h. I have to decorate the space. With alot of white mounting boards.



References

D I Y : AUDIENCE JACKET. (2015). 1st ed. [PDF] Toronto: OCAD University, pp.1-36. Available at: http://research.ocadu.ca/sites/research.ocadu.ca/files/socialbody/201106_AudienceJacket.pdf [Accessed 3 Jan. 2015].

Monday, December 15, 2014

Preparing for Week 7 Guest Visit

Post 43

Happiness level:3

I've been really busy and focusing all my time on the construction of the wooband, codes and graphics. Full steam ahead!

Technical problems encountered:
- Unity can't change scenes with Serial ports. (can't call) Might have to put everything in one scene.
- SO LAGGY and the quality reduces because I had to convert all videos to OGG format.
- Only Unity pro could enable MovieTextures. (solved by using the trial mode..and uh. you know.)
- Arduino RGB colors overlapping each other (solved, but didn't get the color I want)

Motion Graphics problems encountered:
- I need plugins to achieve plexus. (It's complicated, I can't download them. And I'm cheap.)
- Had to depend A LOT on tutorials. (I thought my creative juices and spontaneity were enough, But no.)

Logistics problems encountered:
- My RM175 polystyrene ball dents easily and I don't plan on investing in another one.
- There's a line on the ball which has to covered. (It's the little opening that can't close properly when I sandwich the two halves together)

A great thank you to Yee Siang and David Tan for patiently teaching me and explaining to me the rules of Arduino and Unity.
I'm actually quite disappointed at TOA for not keeping up with the pace and installing UNITY in all the computers. They could install them for free and hire professionals! C# is dang important.

The only person who knows UNITY is Jam, and he's not even assigned to any of us. We had to call him on his personal mobile. This is ridiculous.

Can't believe I have to outsource so many talents and hardware.

Actions to do next:
TRY OUT THE WIFI MODULE!

Tuesday, November 11, 2014

Back to School.

Post 31

Tutor(s) present: Jazmi Jamal

So here starts the first tutorial of my final semester before I plunge headfirst into land of professional working adulthood and OT's. I have made several alterations on the output of my FYP, one drastic one would be the output.

Won't be using a holobox anymore, instead I would be using a projector screen to project map the audiences beside the main screen and the main screen onto a blank wall.

My initial idea was, that I wanted o place 2 monitors at both sides of the screen for instructions and visual aids.  Like so.



BUT, if I had use the two monitors, I'd had to handle 4 monitors including the projected screen, my laptop and the two monitors along with all the extra CPU's and what not. So instead of lugging all these monitors around, using one projector to project the 3 panels would be easier.


I updated him with my progress over the holidays, the changes I made and such.


*Important actions
- Take note of the distance and projector placements
- The song isn't 'hyped' enough.
- Produce the mock up by next week.
- Test out the wifi connection

Somehow every time I think about the FYP I'd get all jittery and wouldn't know where to start. Well at least I'm making things simpler and cleaner, which also requires less effort to produce, so I'm less worried now.

Happiness Level: 6 

(Happy that I could compromise some things.
Instead of 'compromising on the idea and quality' like most people would think compromise meant, these compromises actually help the project)




Thursday, July 10, 2014

Mind Notes

Post no. 10

My meeting with Daniel today for my contextual studies was rather benefiting. He actually suggested that users could light up their gloves by holding each others' hands.

Interesting.